What is the difference between the operating procedures and internal structure of the laminating mac

Ruian Galit printing machinery to tell you about the lamination machine operation rules:

1, temperature: temperature controller is used when the original sensor electric coupling to test the temperature, due to the installation location and the surrounding temperature and internal wind is larger, the influence of the precision of temperature measurement has bigger error of the thermometer on the indicated temperature of relative humidity, the boat should be based on the actual processing experience indicated value of relative reference thermometer and temperature.

2, flammable: glue and thinner, cleaning machine are flammable, pay attention to fire near the machine.

3, do not use hands: when the machine is running, it is forbidden to put your fingers deep into the two rollers so as not to tie your hands. The temperature of the pressing roller of the machine is high. Do not touch the roller with your hands to prevent scalding.

4. System unloading: when stopping the machine, the hydraulic system shall be unloaded, the pressing roller shall be separated from the rubber roller, and the scraper and the prepressing roller shall be released to avoid the long-term deformation and damage of the two rollers under pressure.

5, maintenance and inspection: maintenance and inspection of the machine should be turned off the main power switch of the machine, the machine's electrical system should be maintained good insulation, prevent moisture, stop using the machine should be cut off the power supply, in case of accidents.

6. Do not place items: strictly prohibit placing any tools, devices, sundries on the machine. The working air gap of the rubber roller and the rubber roller is very small. Once any hard objects are pressed into the surface of the rubber roller, they will leave pits or cracks on the rubber. Light needs a longer period of natural elastic recovery, heavy directly make cots scrap.

7, lubrication: the new installation of the use of the machine should be strengthened to the machine lubrication, in the machine transmission running-in stage pay attention to not fast use of the machine.

The above points must be strictly operated, seriously and responsibly Pingan is good. In addition, some people will ask what is the difference between the hot knife and chain knife in the laminating machine, and I will introduce it for you!

PET can not be cut online by the hole punching and round knife pulling mechanism of traditional laminating machine, so it needs to be cut offline manually.

The chain knife (sickle) mechanism can be realized online, but incomplete cutting and tail film are weak points in the process, resulting in the production of automatic lamination machine and die cutting machine in the post-lamination processing, and often cut the paper when it is less than 200 grams of paper and B-grade whiteboard paper.

Hot knife slitting technology has been the foreign laminating machine technology, the price is very expensive; The advantage is can be for all kinds of film online slitting, slitting thoroughly and no tail film, fast speed and high precision, can be suitable for all kinds of paper film online slitting; However, the manufacturing cost of hot knife equipment is very high, and the hot knife laminating machine is very expensive. It is hoped that the equipment will be domestically produced as soon as possible to reduce the cost of purchasing equipment.

The above is the latest news and information brought to you by Ryan Garritt machinery. Welcome new and old customers to inquire! http://www.rajlt.com